Explain the Connection to the Tectonic Plates and Where This Volcano Developed

Describe the processes that form volcanoes.

Volcanoes are a vibrant manifestation of plate tectonics processes. Volcanoes are common along convergent and divergent plate boundaries. Volcanoes are also found within lithospheric plates away from plate boundaries. Wherever mantle is able to melt, volcanoes may be the result.

Figure 1. World map of active volcanoes.

See if you can give a geological explanation for the locations of all the volcanoes in figure 1. What is the Pacific Ring of Fire? Why are the Hawaiian volcanoes located away from any plate boundaries? What is the cause of the volcanoes along the mid-Atlantic ridge?

Volcanoes erupt because mantle rock melts. This is the first stage in creating a volcano. Remember from the chapter "Rocks" that mantle may melt if temperature rises, pressure lowers, or water is added. Be sure to think about how melting occurs in each of the following volcanic settings.

What You'll Learn to Do

• Describe various volcanic processess at plate boundaries
• Understand the development of hotspots and their common locations

Volcanoes at Plate Boundaries

Figure 2. Hiking in the Cascades

Volcanoes are fun (and difficult) to climb. Climbing in the Cascades ranges in difficulty from a non-technical hike, like on South Sister, to a technical climb on Mount Baker in which an ice axe, crampons, and experience are needed.

Convergent Plate Boundaries

Converging plates can be oceanic, continental, or one of each. If both are continental they will smash together and form a mountain range. If at least one is oceanic, it will subduct. A subducting plate creates volcanoes. Locations with converging in which at least one plate is oceanic at the boundary have volcanoes.

Melting

Melting at convergent plate boundaries has many causes. The subducting plate heats up as it sinks into the mantle. Also, water is mixed in with the sediments lying on top of the subducting plate. As the sediments subduct, the water rises into the overlying mantle material and lowers its melting point. Melting in the mantle above the subducting plate leads to volcanoes within an island or continental arc.

Why does melting occur at convergent plate boundaries? The subducting plate heats up as it sinks into the mantle. Also, water is mixed in with the sediments lying on top of the subducting plate. This water lowers the melting point of the mantle material, which increases melting. Volcanoes at convergent plate boundaries are found all along the Pacific Ocean basin, primarily at the edges of the Pacific, Cocos, and Nazca plates. Trenches mark subduction zones, although only the Aleutian Trench and the Java Trench appear on the map in figure 3.

Remember your plate tectonics knowledge. Large earthquakes are extremely common along convergent plate boundaries. Since the Pacific Ocean is rimmed by convergent and transform boundaries, about 80% of all earthquakes strike around the Pacific Ocean basin (the ring of fire). Why are 75% of the world's volcanoes found around the Pacific basin? Of course, these volcanoes are caused by the abundance of convergent plate boundaries around the Pacific.

Figure 3. The Cascade Range is formed by volcanoes created from subduction of oceanic crust beneath the North American continent.

Pacific Rim

The Pacific Ring of Fire is where the majority of the volcanic activity on the Earth occurs. A description of the Pacific Ring of Fire along western North America is a description of the plate boundaries.

• Subduction at the Middle American Trench creates volcanoes in Central America.
• The San Andreas Fault is a transform boundary.
• Subduction of the Juan de Fuca plate beneath the North American plate creates the Cascade volcanoes.
• Subduction of the Pacific plate beneath the North American plate in the north creates the Aleutian Islands volcanoes.

This incredible explosive eruption of Mount Vesuvius in Italy in A.D. 79 is an example of a composite volcano that forms as the result of a convergent plate boundary:

Volcanoes at convergent plate boundaries are found all along the Pacific Ocean basin, primarily at the edges of the Pacific, Cocos, and Nazca plates. Trenches mark subduction zones.

The Cascades are a chain of volcanoes at a convergent boundary where an oceanic plate is subducting beneath a continental plate. Specifically the volcanoes are the result of subduction of the Juan de Fuca, Gorda, and Explorer Plates beneath North America. The volcanoes are located just above where the subducting plate is at the right depth in the mantle for there to be melting (Figure 3).

The Cascades have been active for 27 million years, although the current peaks are no more than 2 million years old. The volcanoes are far enough north and are in a region where storms are common, so many are covered by glaciers.

The Cascades are shown on this interactive map with photos and descriptions of each of the volcanoes.

Figure 4. Mt. Baker, Washington.

Divergent plate boundaries

Figure 5. A volcanic eruption at Surtsey, a small island near Iceland.

At divergent plate boundaries hot mantle rock rises into the space where the plates are moving apart. As the hot mantle rock convects upward it rises higher in the mantle. The rock is under lower pressure; this lowers the melting temperature of the rock and so it melts. Lava erupts through long cracks in the ground, or fissures.

Why does melting occur at divergent plate boundaries? Hot mantle rock rises where the plates are moving apart. This releases pressure on the mantle, which lowers its melting temperature. Lava erupts through long cracks in the ground, orfissures.

Volcanoes erupt at mid-ocean ridges, such as the Mid-Atlantic ridge, where seafloor spreading creates new seafloor in the rift valleys. Where a hotspot is located along the ridge, such as at Iceland, volcanoes grow high enough to create islands (figure 5).

Mid-Ocean Ridges

Figure 6. Mount Gahinga in the East African Rift valley.

Volcanoes erupt at mid-ocean ridges, such as the Mid-Atlantic ridge, where seafloor spreading creates new seafloor in the rift valleys. Where a hotspot is located along the ridge, such as at Iceland, volcanoes grow high enough to create islands.

Continental Rifting

Eruptions are found at divergent plate boundaries as continents break apart. The volcanoes in Figure 6 are in the East African Rift between the African and Arabian plates. Remember from the chapter Plate Tectonics that Baja California is being broken apart from mainland Mexico as another example of continental rifting.

Summary

• Melting is common at convergent plate boundaries.
• Convergent plate boundaries line the Pacific Ocean basin so that volcanic arcs line the region.
• Melting at divergent plate boundaries is due to pressure release.
• At mid-ocean ridges seafloor is pulled apart and new seafloor is created.

Explore More

Use this resource to answer the questions that follow.

(You can stop watching at 11:02.)

1. What percent of volcanoes and earthquakes occur on the Pacific Ring of Fire?
2. How long is the arc of volcanoes along the Pacific Rim?
3. How has Augustine built up so high? Does it have high or low silica?
4. What type of volcanoes are found along the ring of fire? What happens to the gas in the magma?
   what kills so many people?
5. What does water do in hot rock below the surface?
6. What does carbon-12 indicate?
7. What process brings the sediments and water into the mantle?

Volcanoes Hotspots

Figure 7. Diagram showing a cross section though the Earth's lithosphere (in yellow) with magma rising from the mantle (in red)

In geology, the places known as hotspots or hot spots are volcanic regions thought to be fed by underlying mantle that is anomalously hot compared with the surrounding mantle. They may be on, near to, or far from tectonic plate boundaries. Currently, there are two hypotheses that attempt to explain their origins. One suggests that they are due to hot mantle plumes that rise as thermal diapirs from the core–mantle boundary. An alternative hypothesis postulates that it is not high temperature that causes the volcanism, but lithospheric extension that permits the passive rising of melt from shallow depths. This hypothesis considers the term "hotspot" to be a misnomer, asserting that the mantle source beneath them is, in fact, not anomalously hot at all. Well known examples include Hawaii and Yellowstone.

Background

The origins of the concept of hotspots lie in the work of J. Tuzo Wilson, who postulated in 1963 that the Hawaiian Islands result from the slow movement of a tectonic plate across a hot region beneath the surface. It was later postulated that hotspots are fed by narrow streams of hot mantle rising from the Earth's core–mantle boundary in a structure called a mantle plume. Whether or not such mantle plumes exist is currently the subject of a major controversy in Earth science. Estimates for the number of hotspots postulated to be fed by mantle plumes has ranged from about 20 to several thousands, over the years, with most geologists considering a few tens to exist. Hawaii, Réunion, Yellowstone, Galápagos, and Iceland are some of the currently most active volcanic regions to which the hypothesis is applied.

Figure 8. Schematic diagram showing the physical processes inside the Earth that lead to the generation of magma. Partial melting begins above the fusion point.

Most hotspot volcanoes are basaltic (e.g., Hawaii, Tahiti). As a result, they are less explosive than subduction zone volcanoes, in which water is trapped under the overriding plate. Where hotspots occur in continental regions, basaltic magma rises through the continental crust, which melts to form rhyolites. These rhyolites can form violent eruptions. For example, the Yellowstone Caldera was formed by some of the most powerful volcanic explosions in geologic history. However, when the rhyolite is completely erupted, it may be followed by eruptions of basaltic magma rising through the same lithospheric fissures (cracks in the lithosphere). An example of this activity is theIlgachuz Range in British Columbia, which was created by an early complex series of trachyte and rhyolite eruptions, and late extrusion of a sequence of basaltic lava flows.

The hotspot hypothesis is now closely linked to the mantle plume hypothesis.

Comparison with island arc volcanoes

Hotspot volcanoes are considered to have a fundamentally different origin from island arc volcanoes. The latter form over subduction zones, at converging plate boundaries. When one oceanic plate meets another, the denser plate is forced downward into a deep ocean trench. This plate, as it is subducted, releases water into the base of the over-riding plate, and this water mixes with the rock, thus changing its composition causing some rock to melt and rise. It is this that fuels a chain of volcanoes, such as the Aleutian Islands, near Alaska.

Hotspot volcanic chains

The joint mantle plume/hotspot hypothesis envisages the feeder structures to be fixed relative to one another, with the continents and seafloor drifting overhead. The hypothesis thus predicts that time-progressive chains of volcanoes are developed on the surface. Examples are Yellowstone, which lies at the end of a chain of extinct calderas, which become progressively older to the west. Another example is the Hawaiian archipelago, where islands become progressively older and more deeply eroded to the northwest.

Geologists have tried to use hotspot volcanic chains to track the movement of the Earth's tectonic plates. This effort has been vexed by the lack of very long chains, by the fact that many are not time-progressive (e.g. the Galápagos) and by the fact that hotspots do not appear to be fixed relative to one another (e.g. Hawaii and Iceland).

Figure 9. Over millions of years, the Pacific Plate has moved over the Hawaii hotspot, creating a trail of underwater mountains that stretch across the Pacific

Check Your Understanding

Answer the question(s) below to see how well you understand the topics covered in the previous section. This short quiz doesnot count toward your grade in the class, and you can retake it an unlimited number of times.

Use this quiz to check your understanding and decide whether to (1) study the previous section further or (2) move on to the next section.

Explain the Connection to the Tectonic Plates and Where This Volcano Developed

Source: https://courses.lumenlearning.com/wmopen-geology/chapter/outcome-volcano-formation/

Share this post